|
Quartz Clock
Insert fresh longlife
AA battery according to diagram imprinted in plastic slot for
batter on movement at rear of clock. Turn wheel on movement
to move clock hands clockwise until they indicate the correct
time. Large numbers indicate 12 hr time; 24 hr time can be
read on smaller scale.
Ship's Strike Clock
Important!
Do not set the clock with the bells on!
The
green grooved knob on top of the movement (upper right) operates
the striking mechanism. Before setting, turn it to the left
which is the OFF position. Turn the set knob located on the
back of the movement counterclockwise until the hands indicate
the correct time. The battery compartment is at the base
of the clock movement. Insert a fresh AA 1.5V alkaline battery
with the (+) end of the battery to the right. Turn the bell
striking mechanism (green knob) on.
It is normal for the bell to strike out of sequence for a while.
The clock will correct itself after running for about an hour.
To silence the bells, turn the striking switch to left. Since
there is no on or off for the clock’s operation, to stop
the movement from functioning, the battery must be removed. To
remove the battery, use a small screwdriver to dislodge one end
of the battery. Bells not chiming properly indicate weak battery-
replace with fresh battery.
|